Bosch Rexroth R911310079 Instrukcja Użytkownika Pobierz pdf (Strona 61)

VSB 40.1 Maintenance and Installation 8-5

DOK-SUPPL*-VSB*40.1***-PR02-EN-P

7. Loosen the fastening screws of the hard disk frame. The hard disk

and (depending on the device design) the CD DVD drive are mounted

on this plate:

83_Laufwerk2.JPG

Fig. 8-5: Fastening screws of the hard disk frame

8. Lift the hard disk frame:

83_offen.JPG

Fig. 8-6: Lifted hard disk frame

9. Loosen the two cables (IDE and power supply) from the hard disk.

10. Now, remove the old and insert the new hard disk.

11. Connect the two cables. Observe that you don't bend the connection

pins.

Note: Check the cable connections leading to the hard disk for

tightness.

12. After having re-connected the cables, put the hard disk frame into the

housing by using the claws provided at its bottom. While closing the

housing, observe not to squeeze any cables.

13. Fasten the hard disk frame with the two screws.

14. Put the VSB 40.1 in the mounting plate (mounting frame) and fix it

with the four screws.

15. The new hard disk parameters are automatically recognized by the

system. If the operating system does not boot automatically after

switching on the VPB, interrupt the power supply for at least 10

seconds and restart.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 85 86

Brak uwag

Bosch Rexroth R911310079 Instrukcja Użytkownika Strona 61